STL STL060 on TrackeraX
The STL STL060 is a GPS tracker that works with TrackeraX over the stl060 protocol on port 6060. From the platform it accepts custom commands.
Technical sheet
- Brand
- STL
- Model
- STL060
- Protocol
- stl060
- Port
- 6060
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6060 (stl060 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the STL STL060 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the stl060 protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Acceleration
acceleration - Charging
charge - Driver ID (RFID / iButton)
driverUniqueId - Fuel
fuel - Ignition
ignition - Digital inputs
input - Odometer
odometer - Digital outputs
output
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Try the STL060 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.