SVIAS REP-373 on TrackeraX
The SVIAS REP-373 is a GPS tracker that works with TrackeraX over the svias protocol on port 6168. From the platform it supports engine stop, engine resume and arm alarm, plus custom commands. The server decodes 1 alarm type from this protocol, such as sos.
Technical sheet
- Brand
- SVIAS
- Model
- REP-373
- Protocol
- svias
- Port
- 6168
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6168 (svias protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the SVIAS REP-373 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Arm alarm
alarmArm - Disarm alarm
alarmDisarm - Removal alarm
alarmRemove - Request position
positionSingle - Set odometer
setOdometer - Custom command
custom
Data reported by the svias protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Ignition
ignition - Odometer
odometer - External power
power - GSM signal
rssi
Alarms the protocol can report
- SOS
sos
Other SVIAS models
Try the REP-373 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.