TEK protocol devices on TrackeraX

The TEK protocol devices is a GPS tracker that works with TrackeraX over the tek protocol on port 6173. From the platform it accepts custom commands.

Technical sheet

Brand

TEK

Model

TEK protocol devices

Protocol

tek

Port

6173

See the tek protocol

How to connect it to TrackeraX

1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
2. Set the server to the domain of your TrackeraX platform and the port 6173 (tek protocol).
3. Create the device in TrackeraX with its IMEI or identifier and choose the TEK protocol devices model.
4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

• Custom command custom

Data reported by the tek protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

• HDOP hdop

Protocol-specific attributes

src · temp · ullage

Try the TEK protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.