Telic SBC-AVL on TrackeraX
The Telic SBC-AVL is a GPS tracker that works with TrackeraX over the telic protocol on port 6067. From the platform it accepts custom commands. The server decodes 7 alarm types from this protocol, such as geofence entry, geofence exit and low battery.
Technical sheet
- Brand
- Telic
- Model
- Telic SBC-AVL
- Protocol
- telic
- Port
- 6067
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6067 (telic protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Telic SBC-AVL model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the telic protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Ignition
ignition - Satellites
sat
Alarms the protocol can report
- Geofence entry
geofenceEnter - Geofence exit
geofenceExit - Low battery
lowBattery - Movement
movement - Power off
powerOff - Power on
powerOn - SOS
sos
Other Telic models
- Telic Picotrack
- Telic Picotrack Endurance Primary
- Telic Picotrack Endurance Rechargeable
- Telic Picotrack IP69 K
- Telic SBC-AVL Power
- Telic SBC3
Other devices on the telic protocol
Try the Telic SBC-AVL on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.