Teltonika AT2000 on TrackeraX

The Teltonika AT2000 is a GPS tracker that works with TrackeraX over the at2000 protocol on port 7027. From the platform it accepts custom commands.

Technical sheet

Brand

Teltonika

Model

AT2000

Protocol

at2000

Port

7027

See the at2000 protocol

How to connect it to TrackeraX

1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
2. Set the server to the domain of your TrackeraX platform and the port 7027 (at2000 protocol).
3. Create the device in TrackeraX with its IMEI or identifier and choose the Teltonika AT2000 model.
4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

• Custom command custom

Data reported by the at2000 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

• Battery voltage battery
• External power power
• GSM signal rssi
• Satellites sat

Numbered inputs and sensors

• Analog inputs (adc1, adc2…)
• Temperature sensors (temp1, temp2…)

Other Teltonika models

• Teltonika ADAS
• Teltonika ATC700
• Teltonika ATC704
• Teltonika ATC774
• Teltonika ATM700
• Teltonika ATM704
• Teltonika ATM774
• Teltonika CT2000E
• Teltonika EMB100
• Teltonika FCM650
• Teltonika FM36M1
• Teltonika FM1010

All Teltonika models

Try the AT2000 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.