Thuraya satellite on TrackeraX
The Thuraya satellite is a satellite tracker that works with TrackeraX over the thuraya protocol on port 6242. From the platform it accepts custom commands. The server decodes 7 alarm types from this protocol, such as gps antenna cut, harsh acceleration and harsh braking.
Technical sheet
- Brand
- Thuraya
- Model
- Thuraya satellite
- Protocol
- thuraya
- Port
- 6242
- Category
- Satellite
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6242 (thuraya protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Thuraya satellite model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the thuraya protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Ignition
ignition - RPM
rpm
Alarms the protocol can report
- GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Low battery
lowBattery - Overspeed
overspeed - Power cut
powerCut - Vibration
vibration
Protocol-specific attributes
data · eventData
Try the Thuraya satellite on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.