TLT2H 4G on TrackeraX
The TLT2H 4G is a GPS tracker that works with TrackeraX over the tlt2h4g protocol on port 7030. From the platform it accepts custom commands. The server decodes 9 alarm types from this protocol, such as geofence entry, geofence exit and low battery.
Technical sheet
- Brand
- TLT2H
- Model
- TLT2H 4G
- Protocol
- tlt2h4g
- Port
- 7030
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 7030 (tlt2h4g protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the TLT2H 4G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the tlt2h4g protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Door
door - Ignition
ignition - External power
power
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Geofence entry
geofenceEnter - Geofence exit
geofenceExit - Low battery
lowBattery - Low power
lowPower - Overspeed
overspeed - Power cut
powerCut - SOS
sos - Towing
tow - Vibration
vibration
Try the TLT2H 4G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.