Topin ZX303 on TrackeraX
The Topin ZX303 is a GPS tracker that works with TrackeraX over the topin protocol on port 6199. From the platform it supports sos number, plus custom commands. The server decodes 4 alarm types from this protocol, such as low power, overspeed and sos.
Technical sheet
- Brand
- Topin
- Model
- ZX303
- Protocol
- topin
- Port
- 6199
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6199 (topin protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Topin ZX303 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- SOS number
sosNumber - Custom command
custom
Data reported by the topin protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Charging
charge - Heart rate
heartRate - GSM signal
rssi - Satellites
sat - Firmware version
versionFw
Alarms the protocol can report
- Low power
lowPower - Overspeed
overspeed - SOS
sos - Vibration
vibration
Other Topin models
- Topin G03
- Topin G11
- Topin G12P
- Topin G12S
- Topin G15
- Topin G68
- Topin D3 Micro Super Mini GPS Tracker
- Topin ZX302
- Topin ZX810
Try the ZX303 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.