Topten TK208 on TrackeraX
The Topten TK208 is a GPS tracker that works with TrackeraX over the meiligao protocol on port 6009. From the platform it supports engine stop, engine resume and movement alarm, plus custom commands. The server decodes 13 alarm types from this protocol, such as accident, fatigue driving and geofence.
Technical sheet
- Brand
- Topten
- Model
- Topten TK208
- Protocol
- meiligao
- Port
- 6009
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6009 (meiligao protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Topten TK208 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Movement alarm
movementAlarm - Request position
positionSingle - Reporting interval
positionPeriodic - Set time zone
setTimezone - Reboot device
rebootDevice - Output control
outputControl - Custom command
custom - Request photo
requestPhoto
Data reported by the meiligao protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Card
card - Coolant temperature
coolantTemp - Driver ID (RFID / iButton)
driverUniqueId - Fault codes (DTC)
dtcs - Engine load
engineLoad - Fuel consumption
fuelConsumption - Fuel used
fuelUsed - HDOP
hdop - Photo
image - OBD speed
obdSpeed - Odometer
odometer - RPM
rpm - GSM signal
rssi - Satellites
sat - Throttle
throttle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Alarms the protocol can report
- Accident
accident - Fatigue driving
fatigueDriving - Geofence
geofence - Geofence entry
geofenceEnter - GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Idling
idle - Low battery
lowBattery - Movement
movement - Overspeed
overspeed - Power off
powerOff - SOS
sos
Protocol-specific attributes
averageFuelConsumption · averageHotStartTime · averageSpeed · drivingRange · hardAccelerationCount · hardBrakingCount · historyHighestRpm · historyHighestSpeed · singleFuelConsumption · totalDrivingTime · totalHarshAccerleration · totalHarshBrake · totalIdlingTime · totalIgnitionNo
Other Topten models
- Topten GT08
- Topten GT08S
- Topten GT48
- Topten LT02
- Topten LT03
- Topten MT05
- Topten MT05S
- Topten MT35
- Topten PG99
- Topten PT99
- TopTen TK108
- Topten TK208S
Other devices on the meiligao protocol
- Bofan PT30
- Oner CT02
- Meiligao CT04
- Meiligao CT04-R
- Meiligao CT04-X
- Meiligao GSY007
- Meiligao GT 30
- Meiligao GT30i
- Meiligao GT30X
- Meiligao GT60
- Meiligao GT30/i/x
- Meiligao PST-AVL01
Try the Topten TK208 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.