TrackPro TR60 on TrackeraX

The TrackPro TR60 is a GPS tracker that works with TrackeraX over the tr20 protocol on port 6018. From the platform it accepts custom commands.

TrackPro TR60

Technical sheet

Brand
TrackPro
Model
TR60
Protocol
tr20
Port
6018

See the tr20 protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6018 (tr20 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the TrackPro TR60 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom command custom

Data reported by the tr20 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

    Numbered inputs and sensors

    • Temperature sensors (temp1, temp2…)

    Try the TR60 on your own platform

    Open the live demo or check the plans: white label, your domain, your apps.

    Watch live demo · Configure my plan

    Brands, logos and product images belong to their respective owners.