Wialon NeoTech TR\_1000 on TrackeraX
The Wialon NeoTech TR\_1000 is a GPS tracker that works with TrackeraX over the wialon protocol on port 6039. From the platform it supports output control, reboot device and send ussd, plus custom commands.
Technical sheet
- Brand
- Wialon
- Model
- NeoTech TR\_1000
- Protocol
- wialon
- Port
- 6039
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6039 (wialon protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Wialon NeoTech TR\_1000 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output control
outputControl - Reboot device
rebootDevice - Send USSD
sendUssd - Device identification
deviceIdentification - Custom command
custom
Data reported by the wialon protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Device temperature
deviceTemp - Driver ID (RFID / iButton)
driverUniqueId - HDOP
hdop - Digital inputs
input - Digital outputs
output - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Other Wialon models
Other devices on the wialon protocol
Try the NeoTech TR\_1000 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.