WondeX VT10 on TrackeraX
The WondeX VT10 is a GPS tracker that works with TrackeraX over the wondex protocol on port 6032. From the platform it supports request position, reboot device and device status, plus custom commands.
Technical sheet
- Brand
- Wondex
- Model
- WondeX VT10
- Protocol
- wondex
- Port
- 6032
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6032 (wondex protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the WondeX VT10 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Request position
positionSingle - Reboot device
rebootDevice - Device status
getDeviceStatus - Modem status
getModemStatus - Firmware version
getVersion - Device identification
deviceIdentification - Custom command
custom
Data reported by the wondex protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Digital inputs
input - Odometer
odometer - Digital outputs
output - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
Other Wondex models
- Wondex CD111M
- Wondex OT10
- Wondex SPT100
- Wondex TK5000XL
- Wondex TT1
- Wondex VT200
- Wondex VT350
- WondeX SPT-10
- WondeX VT300
Other devices on the wondex protocol
Try the WondeX VT10 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.