Xexun TK103-2 on TrackeraX
The Xexun TK103-2 is a vehicle tracker. It has an internal battery and dual SIM. In TrackeraX it connects over the xexun protocol on port 6006 and accepts 3 commands from the platform.
Technical sheet
- Brand
- Xexun
- Model
- TK103-2
- Protocol
- xexun
- Port
- 6006
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6006 (xexun protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Xexun TK103-2 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Hardware and connectivity
- Internal battery
- Dual SIM
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Custom command
custom
Data reported by the xexun protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Ignition
ignition - External power
power - Satellites
sat
Alarms the protocol can report
- Low battery
lowBattery - Movement
movement - SOS
sos
Protocol-specific attributes
number · serial · signal
Other Xexun models
- Xexun DDX04
- Xexun DDX14
- Xexun DDX15
- Xexun P01
- Xexun P02
- Xexun TK101
- Xexun TK102-2
- Xexun TK201
- Xexun TK201-2
- Xexun TK202
- Xexun TK203
- Xexun TK206
Try the TK103-2 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.