XRB XRB28 on TrackeraX
The XRB XRB28 is a GPS tracker that works with TrackeraX over the xrb28 protocol on port 6180. From the platform it supports request position, reporting interval and arm alarm, plus custom commands. The server decodes 4 alarm types from this protocol, such as fall, fault and low battery.
Technical sheet
- Brand
- XRB
- Model
- XRB28
- Protocol
- xrb28
- Port
- 6180
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6180 (xrb28 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the XRB XRB28 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Request position
positionSingle - Reporting interval
positionPeriodic - Arm alarm
alarmArm - Disarm alarm
alarmDisarm - Custom command
custom
Data reported by the xrb28 protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Battery level
batteryLevel - Blocked
blocked - HDOP
hdop - GSM signal
rssi - Satellites
sat
Alarms the protocol can report
- Fall
fallDown - Fault
fault - Low battery
lowBattery - Movement
movement
Protocol-specific attributes
error
Try the XRB28 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.