transync protocol
TrackeraX decodes the transync protocol on port 6247. These are the devices that use it, the data it reports and the commands you can send to them.
- Port
- 6247
- Models
- 1
- Brands
- 1
Devices that use transync
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the transync protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Driver ID (RFID / iButton)
driverUniqueId - HDOP
hdop - Ignition
ignition - Odometer
odometer - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Alarms the protocol can report
- Accident
accident - GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Low battery
lowBattery - Overspeed
overspeed - Power off
powerOff - Power restored
powerRestored - SOS
sos