TranSync AIS 140 on TrackeraX
The TranSync AIS 140 is a vehicle tracker. It comes with an internal battery. It is rated IP67 against dust and water. In TrackeraX it connects over the transync protocol on port 6247 and accepts 1 command from the platform.
Technical sheet
- Brand
- TranSync
- Model
- TranSync AIS 140
- Protocol
- transync
- Port
- 6247
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6247 (transync protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the TranSync AIS 140 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Hardware and connectivity
- Internal battery
- IP67
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the transync protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Driver ID (RFID / iButton)
driverUniqueId - HDOP
hdop - Ignition
ignition - Odometer
odometer - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
Alarms the protocol can report
- Accident
accident - GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Low battery
lowBattery - Overspeed
overspeed - Power off
powerOff - Power restored
powerRestored - SOS
sos
Try the TranSync AIS 140 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.