ADM ADM300 on TrackeraX
The ADM ADM300 is a vehicle tracker. It includes an internal battery and an RS-485 port. In TrackeraX it connects over the adm protocol on port 6092 and accepts 2 commands from the platform.
Technical sheet
- Brand
- ADM
- Model
- ADM300
- Protocol
- adm
- Port
- 6092
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6092 (adm protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the ADM ADM300 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Hardware and connectivity
- Internal battery
- RS-485
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Device status
getDeviceStatus - Custom command
custom
Data reported by the adm protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Acceleration
acceleration - Battery voltage
battery - HDOP
hdop - Humidity
humidity - Odometer
odometer - External power
power - Satellites
sat - Firmware version
versionFw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Counters (count1, count2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
Protocol-specific attributes
can · illumination
Other ADM models
Other devices on the adm protocol
Try the ADM300 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.