Neomatica ADM50 on TrackeraX

The Neomatica ADM50 is a personal tracker with GPS/GLONASS. It includes an internal battery. In TrackeraX it connects over the adm protocol on port 6092 and accepts 2 commands from the platform.

Technical sheet

Brand: Neomatica
Model: ADM50
Protocol: adm
Port: 6092

See the adm protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6092 (adm protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Neomatica ADM50 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Hardware and connectivity

Internal battery
GLONASS

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Device status getDeviceStatus
Custom command custom

Data reported by the adm protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Acceleration acceleration
Battery voltage battery
HDOP hdop
Humidity humidity
Odometer odometer
External power power
Satellites sat
Firmware version versionFw

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Counters (count1, count2…)
Outputs (out1, out2…)
Temperature sensors (temp1, temp2…)

Protocol-specific attributes

can · illumination

Other Neomatica models

All Neomatica models

Other devices on the adm protocol

Try the ADM50 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.