Cantrack G03 on TrackeraX

The Cantrack G03 is a GPS tracker that works with TrackeraX over the g200 protocol on port 8024. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as overspeed, power cut and sos.

Technical sheet

Brand: Cantrack
Model: Cantrack G03
Protocol: g200
Port: 8024

See the g200 protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 8024 (g200 protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Cantrack G03 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the g200 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Battery level batteryLevel
Blocked blocked
Door door
Fuel fuel
Ignition ignition
Odometer odometer
GSM signal rssi
Satellites sat
Steps steps

Numbered inputs and sensors

IO elements (io1, io2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Overspeed overspeed
Power cut powerCut
SOS sos
Vibration vibration

Protocol-specific attributes

engine · immobilizer · sentry · sleep · turnovers · wake

Other Cantrack models

All Cantrack models

Try the Cantrack G03 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.