Cantrack G900 on TrackeraX

The Cantrack G900 is a GPS tracker. In TrackeraX it connects over the h02 protocol on port 6013 and accepts 6 commands from the platform.

Technical sheet

Brand: Cantrack
Model: G900
Protocol: h02
Port: 6013

See the h02 protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6013 (h02 protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Cantrack G900 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Arm alarm alarmArm
Disarm alarm alarmDisarm
Reporting interval positionPeriodic
Custom command custom

Data reported by the h02 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Battery voltage battery
Battery level batteryLevel
Blocked blocked
Door door
Fuel fuel
Ignition ignition
Odometer odometer
GSM signal rssi
Satellites sat
Steps steps

Numbered inputs and sensors

IO elements (io1, io2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Overspeed overspeed
Power cut powerCut
SOS sos
Vibration vibration

Protocol-specific attributes

engine · immobilizer · sentry · sleep · turnovers · wake

Other Cantrack models

All Cantrack models

Other devices on the h02 protocol

Try the G900 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.