EELINK K9+ on TrackeraX

The EELINK K9+ is a GPS tracker that works with TrackeraX over the eelink protocol on port 6064. From the platform it supports request position, engine stop and engine resume, plus custom commands. The server decodes 12 alarm types from this protocol, such as accident, fall and geofence entry.

EELINK K9+

Technical sheet

Brand
Eelink
Model
EELINK K9+
Protocol
eelink
Port
6064

See the eelink protocol

How to connect it to TrackeraX

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6064 (eelink protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the EELINK K9+ model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Request position positionSingle
  • Engine stop engineStop
  • Engine resume engineResume
  • Reboot device rebootDevice
  • Custom command custom

Data reported by the eelink protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Armed armed
  • Battery voltage battery
  • Blocked blocked
  • Charging charge
  • Fuel fuel
  • Fuel consumption fuelConsumption
  • GPS status gps
  • Humidity humidity
  • Ignition ignition
  • Motion motion
  • Odometer odometer
  • GSM signal rssi
  • Satellites sat
  • Steps steps

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • Accident accident
  • Fall fallDown
  • Geofence entry geofenceEnter
  • Geofence exit geofenceExit
  • GPS antenna cut gpsAntennaCut
  • Low battery lowBattery
  • Low speed lowspeed
  • Overspeed overspeed
  • Power off powerOff
  • Removal removing
  • SOS sos
  • Vibration vibration

Protocol-specific attributes

co2 · illuminance · tag

Other Eelink models

All Eelink models

Other devices on the eelink protocol

Try the EELINK K9+ on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.