iTriangle UX101-AL on TrackeraX
The iTriangle UX101-AL is a GPS tracker that works with TrackeraX over the aquila protocol on port 6089. From the platform it accepts custom commands.
Technical sheet
- Brand
- iTriangle
- Model
- UX101-AL
- Protocol
- aquila
- Port
- 6089
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6089 (aquila protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the iTriangle UX101-AL model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the aquila protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Charging
charge - Fault codes (DTC)
dtcs - Fuel
fuel - HDOP
hdop - Ignition
ignition - Odometer
odometer - External power
power - GSM signal
rssi - Satellites
sat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
Protocol-specific attributes
obd · sensorData · sensorId
Other iTriangle models
- iTriangle AT101 4G
- iTriangle Bharat101 Plus 4G
- iTriangle Bharat101 with IRNSS
- iTriangle OBD II
- iTriangle TS101 Advance
- iTriangle TS101 Basic
- iTriangle TS101 Basic EV
- iTriangle TS101 Basic EV CAN
- iTriangle TS101 Plus 4G
Other devices on the aquila protocol
Try the UX101-AL on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.