Omnicomm Compatible with Omnicomm devices on TrackeraX
The Omnicomm Compatible with Omnicomm devices is a GPS tracker that works with TrackeraX over the omnicomm protocol on port 6203. From the platform it accepts custom commands.
Technical sheet
- Brand
- Omnicomm
- Model
- Compatible with Omnicomm devices
- Protocol
- omnicomm
- Port
- 6203
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6203 (omnicomm protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Omnicomm Compatible with Omnicomm devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the omnicomm protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Ignition
ignition - External power
power - RPM
rpm - Satellites
sat
Protocol-specific attributes
fuel1 · fuel1State · fuel1Temp
Other Omnicomm models
Try the Compatible with Omnicomm devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.