Omnicomm Light on TrackeraX
The Omnicomm Light is a vehicle tracker with GPS/GLONASS. It includes an internal battery, CAN bus reading and an RS-485 port. In TrackeraX it connects over the omnicomm protocol on port 6203 and accepts 1 command from the platform.
Technical sheet
- Brand
- Omnicomm
- Model
- Light
- Protocol
- omnicomm
- Port
- 6203
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6203 (omnicomm protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Omnicomm Light model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Hardware and connectivity
- Internal battery
- CAN bus
- GLONASS
- RS-485
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the omnicomm protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Ignition
ignition - External power
power - RPM
rpm - Satellites
sat
Protocol-specific attributes
fuel1 · fuel1State · fuel1Temp
Other Omnicomm models
Try the Light on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.