Wanwaytech WanWay S20 on TrackeraX

The Wanwaytech WanWay S20 is a GPS tracker. It comes with an internal battery. In TrackeraX it connects over the gt06 protocol on port 6023 and accepts 4 commands from the platform.

Technical sheet

Brand: Wanwaytech
Model: WanWay S20
Protocol: gt06
Port: 6023

See the gt06 protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6023 (gt06 protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Wanwaytech WanWay S20 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Hardware and connectivity

Internal battery

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Request photo requestPhoto
Custom command custom

Data reported by the gt06 protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Armed armed
Battery voltage battery
Battery level batteryLevel
Blocked blocked
Card card
Charging charge
Coolant temperature coolantTemp
Door door
Driver ID (RFID / iButton) driverUniqueId
Driving time drivingTime
Engine load engineLoad
Fuel fuel
Fuel level fuelLevel
Fuel used fuelUsed
Geofence geofence
HDOP hdop
Engine hours hours
Humidity humidity
SIM ICCID iccid
Ignition ignition
Photo image
Digital inputs input
Motion motion
OBD speed obdSpeed
Odometer odometer
Digital outputs output
External power power
RPM rpm
GSM signal rssi
Satellites sat
Visible satellites satVisible
Steps steps
Throttle throttle
VIN vin

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Inputs (in1, in2…)
IO elements (io1, io2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Accident accident
Door door
Fall fallDown
Fatigue driving fatigueDriving
Fault fault
Fuel leak fuelLeak
Geofence geofence
Geofence entry geofenceEnter
Geofence exit geofenceExit
Harsh acceleration hardAcceleration
Harsh braking hardBraking
Harsh cornering hardCornering
Idling idle
Jamming jamming
Lane change laneChange
Lock lock
Low battery lowBattery
Low power lowPower
Movement movement
Overspeed overspeed
Power cut powerCut
Power off powerOff
Power on powerOn
Removal removing
SOS sos
Tampering tampering
Temperature temperature
Towing tow
Unlock unlock
Vibration vibration

Protocol-specific attributes

absoluteCapacity · adcId · alarmJimi · barcode · batteryCell · batteryHealth · batteryStatus · batteryTemp · batteryVersion · bootReason · cameraChannelsBuiltin · cameraChannelsPeripheral · cameraStatus · cardStatus · chargeVoltage · clock · controllerFault · controllerStatus · current · currentChargeInterval · cycleIndex · dataDetails · dataType · deviceVersion · dltData · dltStatus · dltTime · dtcCount · engineStatus · eventData · eventFiles · externalBatteryCharge · externalBatteryCycles · externalBatteryLevel · fuelCapacitive · fuelConsumptionRate · fuelPulse · fuelSensorId · fuelTank · fuelUnit and 30 more

Other Wanwaytech models

All Wanwaytech models

Other devices on the gt06 protocol

Try the WanWay S20 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.