Xexun X24 on TrackeraX
The Xexun X24 is a GPS tracker that works with TrackeraX over the xexun2 protocol on port 6233. From the platform it supports reporting interval, power off and reboot device, plus custom commands. The server decodes 3 alarm types from this protocol, such as fall, removal and sos.
Technical sheet
- Brand
- Xexun
- Model
- X24
- Protocol
- xexun2
- Port
- 6233
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6233 (xexun2 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Xexun X24 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Reporting interval
positionPeriodic - Power off
powerOff - Reboot device
rebootDevice - Custom command
custom
Data reported by the xexun2 protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery level
batteryLevel - Charging
charge - GSM signal
rssi - Satellites
sat
Alarms the protocol can report
- Fall
fallDown - Removal
removing - SOS
sos
Other Xexun models
- Xexun DDX04
- Xexun DDX14
- Xexun DDX15
- Xexun P01
- Xexun P02
- Xexun TK101
- Xexun TK102-2
- Xexun TK103-2
- Xexun TK201
- Xexun TK201-2
- Xexun TK202
- Xexun TK203
Try the X24 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.