Xexun TK104 on TrackeraX
The Xexun TK104 is a GPS tracker that works with TrackeraX over the gps103 protocol on port 6001. From the platform it supports engine stop, engine resume and arm alarm, plus custom commands. The server decodes 14 alarm types from this protocol, such as accident, bonnet open and door.
Technical sheet
- Brand
- Xexun
- Model
- Xexun TK104
- Protocol
- gps103
- Port
- 6001
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6001 (gps103 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Xexun TK104 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Arm alarm
alarmArm - Disarm alarm
alarmDisarm - Request position
positionSingle - Reporting interval
positionPeriodic - Stop reporting
positionStop - Request photo
requestPhoto - Engine stop (custom)
customEngineStop - Engine resume (custom)
customEngineResume - Custom command
custom
Data reported by the gps103 protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Charging
charge - Coolant temperature
coolantTemp - Door
door - Driver ID (RFID / iButton)
driverUniqueId - Fault codes (DTC)
dtcs - Engine load
engineLoad - Fuel
fuel - Fuel consumption
fuelConsumption - HDOP
hdop - Engine hours
hours - Ignition
ignition - Photo
image - OBD speed
obdSpeed - Odometer
odometer - RPM
rpm - GSM signal
rssi - Satellites
sat - Throttle
throttle
Numbered inputs and sensors
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Accident
accident - Bonnet open
bonnet - Door
door - Fault
fault - Foot brake
footBrake - Fuel leak
fuelLeak - Geofence
geofence - Low battery
lowBattery - Movement
movement - Overspeed
overspeed - Power cut
powerCut - SOS
sos - Temperature
temperature - Vibration
vibration
Protocol-specific attributes
error · fuel1 · fuel2 · sensorId · sensorVoltage
Other Xexun models
- Xexun DDX04
- Xexun DDX14
- Xexun DDX15
- Xexun P01
- Xexun P02
- Xexun TK101
- Xexun TK102-2
- Xexun TK103-2
- Xexun TK201
- Xexun TK201-2
- Xexun TK202
- Xexun TK203
Other devices on the gps103 protocol
- Coban 303F
- Coban GPS102
- Coban GPS103
- Coban GPS104
- Coban GPS105
- Coban GPS106
- Coban GPS107
- Coban GPS301
- Coban GPS302
- Coban GPS303
- Coban GPS304
- Coban GPS305
Try the Xexun TK104 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.