totem protocol

TrackeraX decodes the totem protocol on port 6007. These are the devices that use it, the data it reports and the commands you can send to them.

Port
6007
Models
31
Brands
3

Devices that use totem

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stop engineStop
  • Engine resume engineResume
  • Factory reset factoryReset
  • Firmware version getVersion
  • Request position positionSingle
  • Reboot device rebootDevice
  • Custom command custom

Data reported by the totem protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • GPS antenna antenna
  • Battery voltage battery
  • Charging charge
  • Coolant temperature coolantTemp
  • Driver ID (RFID / iButton) driverUniqueId
  • Engine load engineLoad
  • Fuel fuel
  • Fuel consumption fuelConsumption
  • Fuel used fuelUsed
  • HDOP hdop
  • Ignition ignition
  • OBD speed obdSpeed
  • Odometer odometer
  • PDOP pdop
  • External power power
  • RPM rpm
  • Satellites sat
  • Throttle throttle
  • VDOP vdop

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

Alarms the protocol can report

  • Geofence entry geofenceEnter
  • Geofence exit geofenceExit
  • GPS antenna cut gpsAntennaCut
  • Harsh acceleration hardAcceleration
  • Harsh braking hardBraking
  • Idling idle
  • Low battery lowBattery
  • Low power lowPower
  • Overspeed overspeed
  • Parking parking
  • Power cut powerCut
  • Power restored powerRestored
  • SOS sos
  • Towing tow
  • Vibration vibration

Protocol-specific attributes

intakeTemp

All protocols · Watch live demo