Totem Tech AT07-3G on TrackeraX
The Totem Tech AT07-3G is a vehicle tracker. In TrackeraX it connects over the totem protocol on port 6007 and accepts 7 commands from the platform.
Technical sheet
- Brand
- Totem Tech
- Model
- Totem Tech AT07-3G
- Protocol
- totem
- Port
- 6007
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6007 (totem protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Totem Tech AT07-3G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Factory reset
factoryReset - Firmware version
getVersion - Request position
positionSingle - Reboot device
rebootDevice - Custom command
custom
Data reported by the totem protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- GPS antenna
antenna - Battery voltage
battery - Charging
charge - Coolant temperature
coolantTemp - Driver ID (RFID / iButton)
driverUniqueId - Engine load
engineLoad - Fuel
fuel - Fuel consumption
fuelConsumption - Fuel used
fuelUsed - HDOP
hdop - Ignition
ignition - OBD speed
obdSpeed - Odometer
odometer - PDOP
pdop - External power
power - RPM
rpm - Satellites
sat - Throttle
throttle - VDOP
vdop
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Geofence entry
geofenceEnter - Geofence exit
geofenceExit - GPS antenna cut
gpsAntennaCut - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Idling
idle - Low battery
lowBattery - Low power
lowPower - Overspeed
overspeed - Parking
parking - Power cut
powerCut - Power restored
powerRestored - SOS
sos - Towing
tow - Vibration
vibration
Protocol-specific attributes
intakeTemp
Other Totem Tech models
Other devices on the totem protocol
- Totem AT03
- Totem AT04
- Totem AT06
- Totem AT07
- Totem AT08
- Totem AT09
- Totem AT21
- Totem TZ-AVL02
- Totem TZ-AVL03
- Totem TZ-AVL05
- Totem TZ-AVL08
- Totem TZ-AVL09
Try the Totem Tech AT07-3G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.