Totem AT03 on TrackeraX

The Totem AT03 is a GPS tracker that works with TrackeraX over the totem protocol on port 6007. From the platform it supports engine stop, engine resume and factory reset, plus custom commands. The server decodes 15 alarm types from this protocol, such as geofence entry, geofence exit and gps antenna cut.

Technical sheet

Brand: Totem
Model: AT03
Protocol: totem
Port: 6007

See the totem protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6007 (totem protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the Totem AT03 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Engine stop engineStop
Engine resume engineResume
Factory reset factoryReset
Firmware version getVersion
Request position positionSingle
Reboot device rebootDevice
Custom command custom

Data reported by the totem protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

GPS antenna antenna
Battery voltage battery
Charging charge
Coolant temperature coolantTemp
Driver ID (RFID / iButton) driverUniqueId
Engine load engineLoad
Fuel fuel
Fuel consumption fuelConsumption
Fuel used fuelUsed
HDOP hdop
Ignition ignition
OBD speed obdSpeed
Odometer odometer
PDOP pdop
External power power
RPM rpm
Satellites sat
Throttle throttle
VDOP vdop

Numbered inputs and sensors

Analog inputs (adc1, adc2…)
Inputs (in1, in2…)
IO elements (io1, io2…)
Outputs (out1, out2…)
Temperature sensors (temp1, temp2…)

Alarms the protocol can report

Geofence entry geofenceEnter
Geofence exit geofenceExit
GPS antenna cut gpsAntennaCut
Harsh acceleration hardAcceleration
Harsh braking hardBraking
Idling idle
Low battery lowBattery
Low power lowPower
Overspeed overspeed
Parking parking
Power cut powerCut
Power restored powerRestored
SOS sos
Towing tow
Vibration vibration

Protocol-specific attributes

intakeTemp

Other Totem models

All Totem models

Other devices on the totem protocol

Try the AT03 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.