iStartek PT60-L on TrackeraX
The iStartek PT60-L is a GPS tracker. In TrackeraX it connects over the trv protocol on port 6010 and accepts 1 command from the platform.
Technical sheet
- Brand
- Istartek
- Model
- iStartek PT60-L
- Protocol
- trv
- Port
- 6010
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6010 (trv protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the iStartek PT60-L model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the trv protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armed
armed - Battery voltage
battery - Battery level
batteryLevel - Blocked
blocked - Charging
charge - Heart rate
heartRate - Ignition
ignition - Motion
motion - GSM signal
rssi - Satellites
sat - Steps
steps
Alarms the protocol can report
- Fall
fallDown - SOS
sos
Protocol-specific attributes
bloodSugar · mode · pressureDiastolic · pressureSystolic · spo2 · temperature
Other Istartek models
- Istartek iStartek
- iStartek PT24
- iStartek PT29
- iStartek VT100
- iStartek VT100 L
- iStartek VT110
- iStartek VT150
- iStartek VT200
- iStartek VT200 L
- iStartek VT202
- iStartek VT206
- iStartek VT300-L
Other devices on the trv protocol
Try the iStartek PT60-L on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.