iStartek VT110 on TrackeraX

The iStartek VT110 is a GPS tracker that works with TrackeraX over the trv protocol on port 6010. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as fall and sos.

Technical sheet

Brand: Istartek
Model: iStartek VT110
Protocol: trv
Port: 6010

See the trv protocol

How to connect it to TrackeraX

Insert a SIM card with mobile data and set the APN of your carrier on the device.
Set the server to the domain of your TrackeraX platform and the port 6010 (trv protocol).
Create the device in TrackeraX with its IMEI or identifier and choose the iStartek VT110 model.
Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

Commands you can send from TrackeraX

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

Custom command custom

Data reported by the trv protocol

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

Armed armed
Battery voltage battery
Battery level batteryLevel
Blocked blocked
Charging charge
Heart rate heartRate
Ignition ignition
Motion motion
GSM signal rssi
Satellites sat
Steps steps

Alarms the protocol can report

Fall fallDown
SOS sos

Protocol-specific attributes

bloodSugar · mode · pressureDiastolic · pressureSystolic · spo2 · temperature

Other Istartek models

All Istartek models

Other devices on the trv protocol

Try the iStartek VT110 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Watch live demo · Configure my plan

Brands, logos and product images belong to their respective owners.