TRV S22 on TrackeraX
The TRV S22 is a GPS tracker that works with TrackeraX over the trv protocol on port 6010. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as fall and sos.
Technical sheet
- Brand
- TRV
- Model
- S22
- Protocol
- trv
- Port
- 6010
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6010 (trv protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the TRV S22 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom command
custom
Data reported by the trv protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armed
armed - Battery voltage
battery - Battery level
batteryLevel - Blocked
blocked - Charging
charge - Heart rate
heartRate - Ignition
ignition - Motion
motion - GSM signal
rssi - Satellites
sat - Steps
steps
Alarms the protocol can report
- Fall
fallDown - SOS
sos
Protocol-specific attributes
bloodSugar · mode · pressureDiastolic · pressureSystolic · spo2 · temperature
Other TRV models
Other devices on the trv protocol
- iStartek PT24
- iStartek PT29
- iStartek PT60-L
- iStartek VT110
- iStartek VT150
- iStartek VT202
- iStartek VT206
- iStartek VT300-L
Try the S22 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.