Istartek VT110-L on TrackeraX
The Istartek VT110-L is a GPS tracker that works with TrackeraX over the startek protocol on port 6222. From the platform it supports engine stop, engine resume and output control, plus custom commands. The server decodes 8 alarm types from this protocol, such as door, harsh acceleration and harsh braking.
Technical sheet
- Brand
- Istartek
- Model
- VT110-L
- Protocol
- startek
- Port
- 6222
How to connect it to TrackeraX
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6222 (startek protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Istartek VT110-L model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
Commands you can send from TrackeraX
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stop
engineStop - Engine resume
engineResume - Output control
outputControl - Custom command
custom
Data reported by the startek protocol
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltage
battery - Coolant temperature
coolantTemp - Door
door - Driver ID (RFID / iButton)
driverUniqueId - Engine load
engineLoad - Fuel
fuel - Fuel consumption
fuelConsumption - Fuel used
fuelUsed - HDOP
hdop - Engine hours
hours - Ignition
ignition - Digital inputs
input - Odometer
odometer - Digital outputs
output - External power
power - RPM
rpm - Satellites
sat - Throttle
throttle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
Alarms the protocol can report
- Door
door - Harsh acceleration
hardAcceleration - Harsh braking
hardBraking - Harsh cornering
hardCornering - Low power
lowPower - Power cut
powerCut - Power restored
powerRestored - SOS
sos
Protocol-specific attributes
airFlow · airPressure · airTemp · catalystLevel · oilPressure · oilTemp · torque
Other Istartek models
- Istartek iStartek
- iStartek PT24
- iStartek PT29
- iStartek PT60-L
- iStartek VT100
- iStartek VT100 L
- iStartek VT110
- iStartek VT150
- iStartek VT200
- iStartek VT200 L
- iStartek VT202
- iStartek VT206
Try the VT110-L on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Watch live demo · Configure my plan
Brands, logos and product images belong to their respective owners.